(This new “multi-blog” site allows me to write posts for different topics in any order, keeping them all well organized by blog topic. So, don’t be surprised to see articles about other topics sprinkled in with those of my primary “Lost Lord Keeper” research blog.)
My appreciation for history leads me to a certainty that nothing is on an inevitable course. In 1940, I’m certain that many outsiders had a sickening feeling that with the continent under the control of Hitler’s armies, the subjugation of England was unavoidable. Naysayers of the same cloth predicted that all of Ukraine would quickly fall to Putin’s forces in 2022. Both were wrong. Our modern naysayers have failed to grasp the ferocious determination of the Ukrainian people (citizens and soldiers alike) in their refusal to be subjugated. In the same way that the majority of Americans have a special affectionate respect for the British, I suspect that future generations will harbor a particular affection for the grit and ingenuity the Ukrainians have shown in fending off the cruelty of one of the world’s most significant military powers. We are witnessing important history being made. But first, the Ukrainians have to get through a winter ahead that may be largely without heat.
In this article, we will discuss how to use the Rocky Mountain Survival Bags a group of us have built and shipped to Ukraine. This information can also be used by others to fashion their own. It is my fervent hope that these survival bags will help some folks in Ukraine endure (and even be comfortable) during the winter ahead in nights that are akin to “spending the night in a freezer”. If you haven’t read the previous article that lays out the critical thermodynamic insights behind this survival bag, you should!
The Rocky Mountain Survival Bag
When I realized I would not be able to make my Fall 2026 trip to the UK, I had to cancel my plans to help drive one of the convoys of refurbished 4WD vehicles the folks at Ukrainian Action prepare and drive from East London to Kiev. Although disappointed, I inquired about whether they would be willing to distribute the 12 survival bags I had originally planned to bring with me. I was informed their team in Lviv loved the idea, and said they would be glad to distribute as many as I was able to build and ship.
As friends and neighbors heard about the project (and jumped in to help), my original plan to give away a dozen survival bags morphed into a project to build and ship 50 of them to London.

A Ukrainian Action convoy of reburbished, aid-packed 4WDs on their way to Ukraine
As discussed in the previous article, the concept for this bag came out of an effort by Mary and I to develop a lightweight winter survival capability for backpacking with snowshoes in the Rocky Mountains of Colorado. The bag itself is built from a 5×7 “solar tarp” (a poly tarp with a shiny, reflective layer sewn into one side). Folded in half, with the bottom and most of the open side sealed, a “hot pocket” is formed into which your bedding / sleeping bag are placed. If you then effectively close it up above your shoulders (and separately provide a way to keep your exposed head warm), the bag dramatically slows the loss of body heat in an extreme environment. Done properly, it is possible to sleep comfortably in sub-freezing conditions (as demonstrated in the prior article).

The Rocky Mountain Survival Bag

It is important to close off the survival bag above the shoulders (but not over the head)
A Few Caveats
Some tradeoffs had to be made in the design of these survival bags. If I had the luxury of creating them from scratch, they would be another foot longer, and would close off with a zipper (allowing you to get into the bag and close it around your shoulders). I did consider simply buying a ready-made “bivvy bag” that is taller and closes around all but your face. However, such bivvy bags are expensive ($60 each online, vs $15 of materials for each survival bag). The bivvy bags are also much flimsier (and would likely fall apart within a dozen uses). With limited resources, I decided it was far better to provide 4 people a “pretty good” solution that is rugged enough to last through the winter than providing a single person a seemingly great solution that would likely fail within a few weeks of use.
One benefit of the bag’s wider dimension is that it will accommodate “slide sleepers” or could potentially hold two smaller children (allowing them to share body heat). Another key benefit of these bags is that they are simple to modify and adapt. For instance, if you have a similar solar tarp available, it would be a simple matter for a taller person to simply extend the bag by cutting a wide section from the second tarp and attaching it to the top of the existing bag with duct tape.
Closing off the Survival Bag
In only moderate cold, loosely closing the bag may be all that is required to stay warm. In this case, resting something on top of the “open” portions of the bag (like a pillow) may be all that is required. Anything that largely prevents open gaps will do.
But as the temperature around you drops, it is increasingly important to close off the bag (above the shoulders, ideally) to prevent warmer air from seeping out. The best option for doing this may vary for different situations and preferences.
The simplest way to close off the bag (once you are in it) is to grab the upper flap and tuck it under you (as shown in the image below). Then, a loosely piled blanket on your head that also covers the top of the bag will do an effective job of slowing down any “seeping out” of warm air from inside.

The simplest way to close off the top of the survival bag is simply to tuck the upper flap under you
You will notice when you tuck the upper flap under, a gap appears where the tucked-under flap meets the top of the side seam of the bag. The colder the conditions, the more important it will be to close off such gaps. This is what the “binder” clips I have included with each bag are for. If you look at the image below, you will see how a single binder clip is used to clamp this particular gap closed.

A binder clip is shown closing off the bottom of a "tucked under" flap of the survival bag
Keeping Your Head Warm
There is a popular myth that you lose 40% of your body heat through your head. This is incorrect–the real number is less than 10% (the head’s fraction of the body’s total skin area). Wrapping the head itself sufficiently to prevent much of this heat loss is simple. What’s not so simple is also ensuring an adequate ability to breathe.
It turns out that exhaling hot, moist air is one of the most significant drivers of heat loss in a human (about 25% of body heat is breathed out in a cold, dry environment). I’ve also found breathing very cold air for an extended period of time is hard on my lungs, making it much easier to get sick.
Obviously, breathing in a cold environment cannot be helped. But that doesn’t mean there’s nothing we can do to minimize the heat lost in doing so! The simplest way to keep your head warm (and to finish closing off the survival bag) is to place a loosely piled blanket over your head and pillow (overlapping onto the top of the survival bag). This is shown in the image below. Depending upon how cold it is, wearing a hat may or may not be helpful. Just be sure the blanket covers any potential gaps at the top of the survival bag, ideally leaving only a gap in front of the face for breathing.

Keeping the head and neck warm is most simply accomplished by loosely piling a blanket, leaving a gap for breathing (as shown)
My favorite final touch for sleeping outside on very cold nights is to drape a single layer of loosely woven cloth over the breathing gap (close to my face). This essentially provides a curtain to breathe through that will slow down convective heat loss from my face, but more importantly, the fabric curtain becomes a simple “heat exchanger” that captures heat from my outgoing breath and transfers it to “pre-heat” my next intake breath before it reaches my lungs. I have slept happily and snugly warm on many a cold night outdoors with this simple trick!
Keeping Your Head Warm: The Balaclava Approach
Cold weather folks know about balaclavas. Made for extreme environments, a balaclava allows you (with goggles) to completely cover your face in a thick layer of material. This is particularly useful when you need to do things like work outside in an Antarctic storm.
Although sleeping in a balaclava isn’t very practical, the balaclava design shown below highlights an advanced feature worth discussing. Rather than simply breathing through a few holes in a neoprene mask (as simpler balaclava designs do), this particular design provides an actual “heat exchanger” in front of the mouth and nose. While only mildly restricting airflow, this feature captures a fair amount of the body’s exhaled heat and moisture, transferring both to the next intake breath.

A More Practical Solution for Sleeping in Extreme Cold: a “Breathing Tunnel”
If draping a loosely woven cloth over your face isn’t enough to be comfortable, creating a “breathing tunnel” is an approach for handling more extreme cold.
The idea is to create a unobstructed “tunnel” between your face and the cold room. This tunnel acts as a more significant heat exchanger than a simple drape of porous fabric. The idea is that the total interior surface area of this tunnel will absorb more heat from your outgoing breaths than a simple draped cloth. This same greater surface area will also transfer more of that heat into the incoming air as you breathe in.
Securing a short tube in front of your mouth is one approach. Another is shown in the diagram below. By propping a book (or something similar) against the pillow in front of your face, a gap is formed between the book and the bed surface. Note that the book’s purpose is purely structural–its job is to prevent any overnight shifting of the blanket over your head that might close off your breathing tunnel.

You may have your own good ideas to achieve a breathing tunnel. Just be sure these conditions are considered:
1) Don’t leave a big bubble of space around your face. Ideally, you are breathing more or less directly into one end of the tunnel. When you breathe out, you want most of the carbon dioxide in your breath to be forced out of the tunnel (not sitting around in front of your face waiting to be sucked back in with your next breath).
2) Don’t make the tunnel too narrow (i.e. restrictive). Think of a gap no smaller in diameter than the thickness of your wrist.
3) Don’t make the “tunnel” too long (no longer than 6-8 inches), and
4) be sure your “tunnel” isn’t so flimsy or unstable that it might collapse in the night, closing off your access to fresh air.
Adding heat sources
If all of these measures are not enough to keep you warm through the night, its time to add extra heat. The good news is that the survival bag provides a relatively small enclosed space around you, ensuring any heat you are able to add will tend to stay within that enclosed space. The trick is to add a heat source that lets off its heat slowly over the entire night (it doesn’t do you any good to be hot for a couple of hours only be be left shivering by 4am).

Air activated heat packs are an excellent way to add heat to your sleeping bag. Simple, small and lightweight, these packets use iron oxidation to generate heat, produce no harmful gases and many will provide heat all through the night. You simply open it and toss the packet down by your feet. The only issue is that they are “one time” use, so stock up if this is going to be your approach. Also, be aware that they do have a limited shelf life and will eventually become ineffective.
Such heat packs are popular among winter hikers and skiers. Different sizes and shapes are available that fit inside your gloves or shoes to keep you warm during hikes. We carry several of these on wintertime forays. Most of them will provide heat for at least 4 hours. Larger ones will last at least 8-12 hours.
If you are feeling innovative, you may be tempted to consider using embers or coals from a fire, but doing so is dangerous. These produce carbon monoxide as they continue to burn, and are a significant fire hazard if mishandled or improperly contained. Old-school bed warmer pans used such coals to warm a bed (by sweeping an enclosed metal pan filled with coals under the covers), but they did not remain in the bed overnight.
The most economical approach is carefully swaddling something that holds heat well and placing it within your bedding with you. Well wrapped (so it can’t touch you directly or escape its wrapping), such a heat source will slowly give off its heat into the bedding immediately around you (ideally, taking all night to do so). Generally, a great place to put a warmer like this is near your feet. The feet get cold first (since they are furthest from the core of your body, and are the first to feel the effects of cold-related blood vessel constriction in the limbs). If your feet are warm, its easier to for the rest of you to stay warm.
Also, be sure to place your heat source in the lowest layer of your bedding (not above a blanket). Boosting the heat trapped within the lowest layers of your bedding (especially within a reflective survival bag) is the goal.
In wondering about the best candidates for storing heat, I looked into the “volumetric heat capacity” of different materials. I was surprised to find out that the only natural material that holds heat better than liquid water is brass. Iron, steel and even stone are much less effective at storing heat than water. Even better (from a safety perspective) is that water cannot be heated above 212 degrees F. Although you can still give yourself significant burns with boiling water (we cook with it, after all), a campfire can heat materials placed in it to over 600 degrees F, which could cause truly horrific burns if mishandled.
Be aware that water heated to its boiling point is capable of degrading the materials of many of the containers you might consider using. Even purpose-built (traditional) hot water bottles recommend against filling them with boiling water (claiming that water that hot degrades the rubber or thermoplastic they are made from). For example, I considered the use of disposable water bottles. Unfortunately, the thin plastics of they are made from are not rated for water hotter than about 150 degrees F. Water hotter than this causes them to break down, and they will fall apart.
The best commonly available option is a good one, though. Hard water bottles (like those made by Nalgene) can be purchased new for less than $20. These hold as much as 48oz of water, and are generally rated for use all the way to 212 degrees F. Their wide opening helps prevent spilling when filling them with very hot water and they seal well. Just be sure to leave a bit of air at the top to avoid any possibility of overpressure.

Of course, a robust way of swaddling this bottle is needed if you’re going to fill it with scalding hot water and place it next to you in your bedding. Although you can buy neoprene covers for these bottles, those are usually intended to keep the bottle’s contents cold and do not comprehensively cover the bottle. They will not to keep you safe from touching any part of a very hot bottle surface.
The good news is that swaddling one of these bottles well will not only protect you, but will help the bottle retain its heat longer (which is perfect). You will likely want to adjust how many layers of swaddling to use, ensuring that the hot water bottle provides a steady source of heat throughout the night. If it cools too quickly, simply wrap some aluminum foil (which is reflective to IR photons) into the swaddling to slow down how quickly the bottle is able to give off its heat.
Personally, I would roll the filled bottle into a towel–closing the towel “roll” off in tight gathers above and below the bottle using loops of velcro. Just be SURE the bottle is well secured and can’t work its way out of its swaddling in the night. If you are careless in this, you may find yourself paying for it with painful burns!
One last observation: This hot water bottle “heater” can also be used during the day. As long as it is well secured, you can carry it under your coat to keep you warm while you are out and about (or even while sitting home in the evening). Anything that keeps your core warm enough will help keep your limbs warm as well by preventing the constriction of blood vessels in reaction to a decline in core body temperature. Likewise, aluminum foil secured to a shirt (worn over other clothing and under an outer coat) can be used to improvise a reflective layer for your winter wardrobe in an emergency…
Building the Survival Bags
I built several prototypes of the survival bag as I worked my way through how best to build them (especially how to make them stronger, and which materials to use). After freezer testing the first bag, I found the heavy tape I was using for the seams began pulling away from the bag’s surface in extreme cold. To resolve this, I switched to the much more expensive Gorilla Extreme Weather tape. When I repeated the freezer test using this tape, the seams all held fast.
Imagining someone putting pressure against the bottom of the bag with their feet gave me concerns about the need to mechanically reinforce the seams of the bag at critical points. Eventually, this led me to discovering plastic “zip rivets” used the automotive accessory world. Meant to hold aftermarket fenders in place, these little wonders are rated to 80 pounds of restraining force, even in harsh weather conditions. They worked wonderfully at strongly clamping the taped seams of the survival bags together at critical points.
The final major improvement was turning the bags inside out to lay a reinforcing face along the inside of the new seams. This added a great deal of strength, and will prevent bedding from sticking to the inside of seams otherwise only taped from the outside.
Once I had worked out how to build the bags, I created an information sheet and product stickers (both printed in English and Ukrainian, of course). All that was left was building 50 of them in time to have them reach Ukraine before winter.
I built a fair number of these bags on my own over many weeks, but a number of friends and neighbors also volunteered to help. Their help included money to cover the significant cost of building so many bags, but also help building them. We hosted a couple of “build parties”, where folks pitched in to build a batch of survival bags in one go. These were a lot of fun! Here are some pics:
As a final finishing touch, Mary created a handmade card design to send to the folks with Ukrainian Action and also for folks here who contributed to the project. Perfect!

So with my sincere thanks to everyone who contributed both time and money to see this project through, I have confirmed that all 50 bags have made it to London in time to be part of the November convoy to Ukraine!
So, here’s to the brave people of Ukraine fighting off the attempt of a much larger country to subjugate them. We are not the only Americans who are doing what we can to help–fuel prices be damned. Stay safe and stay warm.
Slava Ukraini !















